Output Tray Remove jammed media from the output tray by gently pulling it to the left away from the media exit area. A surface can be tested for levelness with a standard round pencil. Windows operating system also uses tabs. Looking for a tech gift that’s not too expensive? Page 62 Select the Change Capacity Only check box. Consumable Life Expectancies The actual life expectancy will vary depending on these and other printing variables, including continuous or intermittent printing, ambient temperature, and humidity.
|Date Added:||8 June 2008|
|File Size:||60.96 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Page The most current worldwide information can be found at www. Check the color, size volume and logo written on the box of the toner cartridge to be installed.
The actual life expectancy will vary depending on these and other printing variables, including continuous or intermittent printing, ambient temperature, and humidity. Hold the waste toner bottle verti- cally, and then plug the minnolta open- ings with the caps. Subscription auto-renews at the end of the term Learn more. Windows operating system also uses tabs. Not underneath the printer or another machine as magivolor can result in dam- age to that cord.
The media size set Install the correct media with the printer driver size.
The toner cartridge is damaged. When a print job is received, the printer returns to normal power. Monochrome printing starts 0.
Konica Minolta Magicolor W A4 Colour Laser Printer
Replacing The Opc Drum Cartridge If you open the door before the Ready indicator on the control panel lights up and the Error indica- tor goes off, the printer stops and repeats the calibration cycle. Any damage to the printer or quality problems caused by a refilled toner cartridge will void your warranty.
Fuser Jams Lift up the two fuser unit levers. If the toner smudges are on only the front of the page: The printer is on a hard, flat, level surface.
Konica Minolta magicolor 2300W – printer – color – laser
Rotate the transfer belt release lever counterclockwise to its correct 7: Loading Media Do not fan transparencies. The printer stops and will not miolta again until the waste toner koniac is replaced. If you are inexperienced with updating Konica Minolta device drivers manually, we highly recommend downloading the Konica Minolta magicolor W Driver Utility.
Turn it off and wait until it cools down. Displaying Printer Driver Settings He is a lifelong computer geek and loves everything related to computers, software, and new technology.
Remove the OPC drum cartridge and check for damage. The maximum power of the laser diode is 5 mW, and the wavelength is — nm. If the pencil rolls, the surface is not level. Media is flat, especially on the leading edge. Load the media into the tray again. There is no possibility of danger from the laser, provided the printer is operated according to the instructions in this manual. Duplexing custom-sized media, envelopes, labels, postcards, thick stock, or transparencies is not supported.
This page contains information about installing the latest Konica Minolta magicolor W driver downloads using the Konica Minolta Driver Update Tool.
Using unsupported transparencies will result in damaging your printer and in voiding your warranty.
Tray 1 Multipurpose Tray Remove the media from Tray 1. Notes on your safety and operating safety Working improperly with the printer can result in health hazards, electric shocks and even fires. To order approved transparency media, go to www. Before you unpack the laser printer, you should make yourself familiar with this information on your safety and operating safety.