This combination of features allows you to use NI system SMUs in a wide range of applications; from materials research and parametric test to high volume production test of RF and mixed signal ICs. Ticket page with photos Photos. There seems to be a control for “source A ” which may be what you’re looking for as far as setting the amperage. How do I put the Model , , into Cal Enable mode? From the Configuration pop-up look at the Installed drivers section to find and install the NI Place Controls onto the Panel using the Unplaced items box. Wire together the path with new extension terminal on the top right of the Replace File Extension Node to the file terminal on the top left of the Write Delimited Spreadsheet Node.

Uploader: Gardarg
Date Added: 11 March 2010
File Size: 56.18 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 39321
Price: Free* [*Free Regsitration Required]

Keithley Firmware Firmware Version A04, This is the easiest method to use with the dynamic data type that is returned by any express VI. Reposition controls on the Diagram for Configure Output and Enable Output nodes to make room for extra controls.

This instrument will return to normal display mode, and the storing of calibration constants is now enabled. You can then open this file with Excel. The COM port will not show up in the Hardware tab. Go back to the Diagram by selecting Diagram in the View Selector.


Instrument Control (GPIB, Serial, VISA, IVI)

View how to create a Format Specifier by selecting the Write Delimited Spreadsheet Node and selecting Online manual in the Configuration pane on the right. NO internal cal enable switch, performed digitally through sequence during power up. Rename the control “File Name”. The instrument will then be detected.

Most Active Software Boards: DC Power supplies Tech: You can also troubleshoot and meithley manual function calls to your instrument to ensure that it is working as expected before moving into automation.

Automating Measurements From a Keithley 2400 SourceMeter SMU Instrument With LabVIEW NXG

Firmware Version Back to Top 2. Repair measurements Photo internal Photo internal Photo internal. This schematics provided as is, reverse engineered by instrument owners. CAL mode is enabled with the jumper to the left when looking at the instrument from the font.

Delete the yellow “Error” wire between the two. National Instruments Applications Engineer. On the Build Array Node connect the first terminal Element 1 to the voltage indicator wire, Labviiew 2 to the current indicator wire, and Element 3 to the resistance indicator wire.


Model Multimeter, Calibration Manual, Rev.

Keithley Current Source – Instrument Driver – National Instruments

Message 3 of 3. Hello Rachel, Once you can manage to get your data into LabVIEW, it is not difficult to write it to a tab delimited file labvoew can be read by excel. Learn how to solve today? Firmware Version A04, Hi rachel-d, It looks like that instrument driver is only one VI, and is not a certified driver.

Source Measure Unit Instruments. Model Instruction manual. Do the same for actual maximum and actual minimum terminals on the right hand side of the Histogram Node. D Model quick reference guide, Rev.

March 16,1: Source Measure Unit Instruments Tech: The Histogram Node can be configured with several inputs.