The Adapter Properties screen shown below allows you to view and modify adapter settings. This field is grayed out under the following conditions:. To add an adapter to the boot list, press the Insert key while on the Boot Adapter List. Changes to this setting are reflected in the Status field on the main Adapter List menu. Some options on the Exit screen might be grayed out, indicating that they are not available at this time. Set this option to No if you have problems with a device that responds to all LUNs whether they are occupied or not. Others looks like being real driver but we haven’t used them yet.

Uploader: Baramar
Date Added: 21 July 2016
File Size: 39.11 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 88220
Price: Free* [*Free Regsitration Required]

This option allows you to prevent a hook on INT40, if required. Maximum number of disks allowed for this type of array. This type is used when there are two to six active members in RAID array.

Caution – If you reboot the system without properly exiting from this utility, some changes may not take effect. The Activate Array option enables you to reactivate an inactive array that has been added to a system. Otherwise, the old partitioning data will be reused.

If one of the two disk drives used in the RAID 1 volume fails, the hotspare drive automatically replaces it in the volume scdi resync is immediately performed. Use the arrow keys to select the desired adapter and press Enter to add it to the end of the Boot Adapter List. The system BIOS assigns this value. It will log a ligne to ecsi when something failed and will send you a mail.


From the Adapter List, press the Esc key to exit. Staggered spinups balance the total electrical current load on the system during boot.

In most case, your controller ID will be 0. Indicates whether to allow a device to disconnect during SCSI operations. Alternate CHS Mapping utilizes an alternate, possibly less efficient, mapping that may be required if a device is moved between adapters from different vendors.

Chapter 4. Message-based devices

The status of the array. This area includes a cursor for menu-item selection. The default value is 2 seconds, with options between 1 and 10 seconds. Press Enter to execute the function associated to the field. It has a striped layout. Select a menu item and press Enter. If you insert an drive that has been configured with a RAID volume into a server that did not previously have its drives configured with RAID volumes, the existing drive s in the server will be converted to RAID volumes during automatic synchronization and any existing data on the existing drive s in the server will be erased.


The Configuration Utility will pause while the hotspare is being added. As disks are added, the Array Size field changes to reflect the size of the new volume.

The counts stop when they reach fuaion maximum value.


BIOS upgrade from a Linux system. Indicates the existence of a RAID array on an adapter and what state its in. Specifies the default video mode for the Configuration utility. Defines how the Cylinder Head Sector values are mapped onto a disk without pre-existing partition information. Specifies the relative boot order 0 to 3 of an adapter. Up, down, left, right movement to position the cursor.

Indicates whether an adapter has automatic-termination control, and if so, its current status. Items with values in [ ] brackets are modifiable. When part of an array, this option shows the size used for the array.

Currently defined values are:. To wait for any key after displaying a message, specify Yes. The identifier of the array.