Open the ADF cover all the way. Is your diver of SCSI board installed correctly? However, the effective speed of this interface is 1MBPS. Is the option board of the scanner installed correctly? When using MD under Windows , a problem is reported that the endorser imprinter can not print correctly.
|Date Added:||14 March 2018|
|File Size:||22.48 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The most popular USB interface is called Version1. After confirming the lamps in step 2press the B5-size sensor again. Is the power of the scanner turned on? With Windows, it is reported that all FJ scanners have a problem when operating.
The file has m3093dgg been installed or have deleted.
Introduction of End of Life product “M3093DE/DG”.
Turn the power on while pressing the OMR sensor. The transition status is recognized by the LEDs.
Is the option board of the scanner installed correctly? Is the power of the scanner turned on before turning on the power of PC?
If the lamps are not turned on or off as shown in Table 1, repeat this step. Does your driver support your operating system? Are the terminators of all devices set correctly? Is the scanner in the state of “Ready to operate”? Changing product identification 4.
Fujitsu fi Series Image Scanner Product
Open the ADF cover all the way. Please check the following items first. Some causes are probable regarding this error message. We have no plan to support this problem, please use another board.
When the scanner enters ID change mode, the lamps are turned on or off as shown in Table scanne for the product ID change mode.
fi Series Manual Downloads: MDG – Fujitsu Global
Probable trouble at scanner connection. Is the terminator set properly?
We are confirming a detailed cause. This message appears when the driver can not receive answers from the scanner. When you stop pressing the OMR sensor, the lamps are turned on or off as shown in Table 1 according to the current ID.
Manual Downloads: M3093DG
Sensor location MGX Figure 2. Please check the followings. Is the power cable of the scanner connected correctly and the scanner power turned on? Is the scanner supported by the driver connected? There is not any problem with WindowsNT 4. Fujitsu fi Series Image Scanner Product.
Contacts Related links Sitemap. Use the following procedure to make the scanner select one of the four product IDs: When using MD under Windowsa problem is reported that the endorser imprinter can not print correctly. However, the effective speed of this interface is 1MBPS.
DILL using 16 bit version are not found. Is your diver of SCSI board installed correctly?