If it is not, turn on the printer, and then, turn off the printer. Because labels are especially sensitive to temperature and humidity, use them only under normal operating conditions. Connect your computer to the desired interface as described below. Selecting A Built-in Font Adjusting The Top-of-form Position Multipart forms You can use continuous or shingle-sheet carbonless multipart forms of up to four parts one original plus three copies. Move the paper a little to the left.
|Date Added:||14 March 2015|
|File Size:||30.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Stop printing and contact your dealer to have the print head replaced.
Epson LQ-1150 User Manual
Installing The Printer Software Page Paper feed speed: Page length for tractor This setting allows you to set the page length oq inches for continuous paper. Fit the notches in the cut-sheet feeder over the mounting posts on the printer.
Hold another paper support and push the tips into the notches on the paper tension unit. Then open the sprocket covers of the tractor and remove the paper.
Remove the paper guide and open the paper guide cover. Assembling The Printer Assembling the Printer This section provides you with information on how to get your printer up and running. You can specify 10 seconds or 30 seconds for the auto interface lw time.
High speed draft cps at 10 cpi cps at 12 cpi Draft cps at 10 cpi cps at 12 cpi cps at 15 cpi Draft condensed cps at 17 cpi cps at 20 cpi Push the sprocket lock lever back to lock it in place. Raise it up, and then push it firmly until it fits in place. Problems and Solutions Most problems you may encounter while operating your printer have simple solutions.
Choosing A Place For The Printer You must remove all protective materials packed around and inside your printer before you set it up and turn on epsoj power.
Skip over perforation This feature is available only when continuous paper is selected. Shopbop Designer Fashion Brands. This column 24 pins Impact dotmatrix printer has print speed draft mode 10cpi that delivers characters per second.
Select Shortcut The selected icon is displayed in the system icon tray on the taskbar on the PC screen. Printing On Continuous Paper Turn off the printer and check for a paper jam, a ribbon jam or other problems.
Epson LQ-1150 II Dot Matrix Printer
The minimum right margin is 3. Then slide the right sprocket unit to match the width of your paper, but do 150 lock it. Set the paper-release lever to the single-sheet position.
The minimum left margin is 3. Comments to this Manuals Your Name.
When you push the tractor onto the posts, you should feel the notches snap into place. If you are a seller for this product, would you like to suggest updates through seller support?
EPSON LQ /II ESC/P 2 Drivers Download for Free | Driver Talent
Insert the paper into the bottom paper slot or into the rear paper slot as shown below, and pull it up. Setting Up Epson Status Monitor 3 Noise Levels 55 Fpson Humidity Using The Printer Software If there is a ground wire at the end of the cable, attach it to the ground connector located to the right of the parallel interface port.
Keep the following tips in mind: Cleaning The Printer Be careful not to get water onto the printer mechanism or electronic components.