Press F1 to resume”. Press F10 to save the setting and reboot. Then the LED starts to blink. Go to the device manager to check if the Reaktek Audio driver is installed. Please understand that this is a normal behavior of Intel boxed heat sink. Boot up the system and then enter into BIOS setup.

Uploader: Mujar
Date Added: 1 March 2017
File Size: 46.37 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 58276
Price: Free* [*Free Regsitration Required]

Then you will see MAC address, pls. Select the driver to install according to the mode you choose and the OS you install. How could I solve this problem?

Why does Beebox Series platform show p4dual-9115gl Press F1 to resume”. Please understand that this is a normal behavior of Intel boxed heat sink.

Then you will see these messages, Please insert a diskette into the floppy drive. Follow Intel driver installer to install the graphics driver. The actual aasrock may differ by model. FSB frequency to 1: Plug the 24 pin power connector on the motherboard without other devices.


asRock P4DualGL

We set it as “p” and 24Hz during our tests. Click “Setup” to go into “Wireless Network properties.

How could I do? Then you can freely enjoy the benefit of Dual Graphics feature.

ASRock P4DualGL Realtek AC’97 audio driver – A – Win , Win XP

Then you can play the content. When “Done” showing, the MAC address already been flash successfully. Please download and install new Asrockk driver Please refer to below steps to install the HDD driver: Please refer to the Web page from following to install Windows7 on AM4 platform mothebroards.

For Z68 Extreme4, please connect to the ports as shown below.

Asrock P4DUAL-915GL User Manual

Click “Load driver” icon at the “Where do you want to install Windows? My motherboard is K7S8X.

Press “F10” to save and exit. If using Windows 10 RS1 and installing Realtek driver, it may get siund Use Orbweb to remotely control the system to sleep or wake.


You do not need to adjust any settings in the BIOS. Please follow the steps below to set up your system.

Asrock P4Dual-915GL Audio Driver

After the process finished, please restart the system. Install latest drivers from ASRock website. How do I do? Key in “drvcfg —s [Drv number] axrock number]” to enter Raid Utility. What should I do to make the SD card reader work properly? Type “Activation” on Windows search and press enter.

Formatting the floppy diskette will lose ALL data in it! Please install the AXTU v0.