MSA1500 MPIO DRIVER

You are notified when the installation is complete. The default parameters are:. I seem to have lost my post, so I’m going to throw this up again. We recommend that you have at least 8 active parallel sessions between the device and your application host. On the Confirm installation selections page, confirm the selection, and then select Restart the destination server automatically if required , as shown below. For example, if the host has two interfaces connected to iSCSI network and the device has two interfaces connected to iSCSI network, then you need four sessions configured with proper path permutations only two sessions will be required if each DATA interface and host interface is on a different IP subnet and is not routable.

Uploader: Maukree
Date Added: 22 August 2017
File Size: 57.86 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 29685
Price: Free* [*Free Regsitration Required]

This starts the Add Roles and Features wizard.

The device serial number is displayed in the right Quick Glance pane of the device dashboard. Should I not have gone up to FW 5. In the Discover Target Portal dialog box, perform the following steps: Hewlett Packard Enterprise International. In the DSM Name section, click Details and verify that the parameters are set to the default parameters.

  ENV2 SOFTWARE DRIVER

Contact Email us Tell us what you think. On the Before you begin page, click Next. To mount a volume, perform the following steps. We recommend that you have at least 8 active parallel sessions between the device and your application host. Use physical network interfaces or virtual interfaces via network virtualization technologies on the hardware or operating system level on your Windows Server host.

Any help is greatly appreciated. When MPIO is installed on your host servers running Windows Server R2, the servers can then tolerate a link, network, or interface failure. Repeat steps for a second network interface for example, DATA 1 on your device. So, I guess my questions are: On the Select installation type page, accept the default setting of Role-based or feature-based installation.

To get the device serial number, access your StorSimple Device Manager service. There are no open issues. With the two network interfaces on the device, this configuration would result in 8 active sessions. You are notified when the installation is complete.

Configure MPIO for your StorSimple device | Microsoft Docs

You will need to configure 8 instead of the 4 sessions described here. Thanks for the feedback. MPIO uses redundant physical path components — adapters, cables, and switches — to create logical paths between the server and the storage device. Your host server should mmpio discovered automatically. I tried to load the HP version over the top, but it didn’t work.

  EASYCODER 3400E 203 DPI DRIVER DOWNLOAD

Thanks for the reply. Configure MPIO for high availability and load balancing Each of the preceding steps is discussed in the following sections. Choose the type you’d like to provide: If you use two network interfaces, both interfaces should be of an identical type. All forum topics Previous Topic Next Topic.

The solution is easy. For more information, see MPIO overview.

Configure Multipath I/O for your StorSimple device

We have redundant Brocade 4GB switches with the second mpil currently turned off. On the Select server roles page, click Next. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.

Reboot the server when prompted.